New Non-Metallic Authentic Wolmanized® L³ Outdoor Wood
Product FAQs
1. Can I paint or stain new non-metallic Authentic Wolmanized® L³ Outdoor wood?
Yes, you can stain or paint Wolmanized® wood. You can also coat this wood with a water repellent; in fact, we highly recommend it. The best way to tackle these jobs depends on the wood you have, its exposure, and the coating you plan to use. For detailed information, click here.
2. How long must you wait before the wood is dry internally?
The time it takes for wood to dry out depends on the climate and the wood's exposure. In summer in the American southwest, deck lumber open to sunshine can dry in a few days. In cool, damp weather or when shaded by an overhanging roof or tree, it will take much longer for wood to dry. As a fairly safe average, we recommend waiting six months before applying paint
3. What maintenance is needed for the product?
No maintenance is needed to renew resistance to fungi and termites. Wolmanized® wood has a lifetime limited warranty against these organisms. However, protection is required to maintain the wood's appearance against weather. Sun and rain cycles cause stresses in lumber and result in swelling, shrinking, warping, and cracking.
- To help protect your project against moisture damage, apply an effective brand of water repellent as soon as your outdoor wood project is finished or, for large projects, as sections are completed. Water repellent should be applied every year or two.
- To revitalize a dingy appearance caused by dirt and mildew, use deck brightener to clean the outdoor wood.
To validate the warranty in some states and for some species, apply an end-cut solution.
4. Where do I get new non-metallic Authentic Wolmanized® L³ Outdoor wood?
Contact us today!
5. Is new non-metallic Authentic Wolmanized® L³ Outdoor wood safe?
New non-metallic Authentic Wolmanized® L³ Outdoor wood is safe to people, pets and plants when used as recommended.
6. How is new non-metallic Authentic Wolmanized® L³ Outdoor wood produced?
New non-metallic Authentic Wolmanized® L³ Outdoor wood is made in a pressurized cylinder using a closed system that recycles excess preservative for future use and releases no air pollutants nor wastewater. Only licensed producers who follow stringent quality control measures make Wolmanized wood. The basic treating process is simple and highly controlled.
1 — Lumber, timbers, or plywood is loaded onto small rail or tram cars. The trams are
moved into a large, horizontal treating cylinder.
2 — The cylinder door is sealed and a vacuum is applied to remove air from the cylinder
and the wood cells.
3 — Preservative solution is then pumped into the cylinder.
4 — The pressure is raised to about 150 pounds per square inch, forcing the preservative into the
wood. Treating time varies depending on species of wood, commodity being
treated, and the amount of preservative to be impregnated.
5 — At the end of the process, excess treating solution is pumped out of the cylinder
and back to a storage tank for later re-use.
6 — A final vacuum removes excess preservative from wood cells. The cylinder door is
opened and the trams are pulled out. The wood is wet, so it is kept on a concrete
pad until any dripping ceases.
7. Does new non-metallic Authentic Wolmanized® L³ Outdoor wood come with a water repellent?
A compatible water repellent additive to provide built-in moisture protection is available in some areas. (Also, Thompsonized® Wood is high grade material that has factory-applied waterproofer.)
8. What are the environmental benefits of new non-metallic Authentic Wolmanized® L³ Outdoor wood?
Unlike plastics, steel, and concrete, Wolmanized wood is made from a renewable resource grown on managed timberlands. It requires less energy to produce than plastics and offers greater insulation value; and, because of its lighter weight, preserved wood can often be installed with lighter equipment which has less environmental impact. Woods products reduce greenhouse gasses, and preservative treatment extends their service life.
9. What are the strength properties of new non-metallic Authentic Wolmanized® L³ Outdoor wood?
This wood has the same strength properties of untreated wood of the same species, grade, and moisture content.
10. What hardware is recommended for new non-metallic Authentic Wolmanized® L³ Outdoor wood?
For detailed information on recommended hardware for new non-metallic Authentic Wolmanized® L³ wood, please click here.
11. How do I dispose of new non-metallic Authentic Wolmanized® L³ Outdoor wood waste?
Wolmanized® wood waste, such as scraps, broken boards, and sawdust, can be disposed of with ordinary trash collection. Neither the wood nor the preservative residues are considered hazardous wastes. If a particular landfill has restrictions against CCA-treated wood, it may accept Wolmanized® Outdoor wood. Treated sawdust and shavings are not recommended for composting, mulching, or animal bedding, and the wood should not be burned except in approved commercial incinerators.